Home > Ford > Ford Powerstroke 2003-2007 6.0L > Engine Parts >

Elite 6.0/6.4 Billet Stage Cams


Elite 6.0/6.4 Billet Stage Cams


 
Our Price: $1,200.00

Quantity in Stock:(Out of Stock)

Product Code: ELBS2C


Stage*:
Stage 1
Stage 2
Stage 3

Qty:  
Description
 
In the quest for more power and efficiency the need for a billet camshaft was required. To get the appropriate cam profiles the OEM camshaft could not be ground to what we needed so billet cams were produced. These cams are designed to maximize performance while still utilizing the stock hydraulic lifters. Made fresh from Billet so no core is required. Piston fly-cutting is mandatory. Designed to extend and raise horsepower/torque peak. Requires valvetrain upgrades

Idle-3800rpm
Stage 1.5 Cam
Duration 184/196
Valve Lift 0.504"
Requires 0.040" valve reliefs
Valvetrain upgrades recommended


1700-4200rpm
Stage 2 Cam
Duration 190/196
Valve Lift 0.504"
Requires 0.080" valve reliefs
Valvetrain upgrades recommended

2000-4500+rpm
Stage 3
Duration 200/210
Valve Lift 0.504"
Requires 0.080" valve reliefs
Valvetrain upgrades required

All of the above cams utilize over .400" valve lift. We are able to maximize airflow gains by doing this, as these cams spend the majority of time at or over .400" valve lift which makes large gains in airflow. In comparison, a camshaft that only has a peak valve lift of .400" spends very little time at .400" and much of its time at lower lifts. What this means is the average time the valve lift is open is at a higher lift, the 6.4 heads flow more air at .400" than anywhere else so our goal is to be at .400" almost all of the time, the above camshafts do just that.

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Ford > Ford Powerstroke 2003-2007 6.0L > Engine Parts
Ford > Ford Powerstroke 2008-2010 6.4L > Engine Parts