The TS Performance 1290308 Stryker Module is a plug-and-play performance upgrade for your 2014-2016 Ram 1500 3.0L EcoDiesel.

THE PERFECT INSIGHT Observe and understand your vehicle’s parameters using Edge’s state-of-the-art technology. The Edge Products 84130 Insight CTS2 delivers unmatched monitoring capability for any OBD II vehicle (1996 or newer). This...

The TS Performance 1110308P MP-8 Pro for your 2014-2016 Ram 1500 3.0L EcoDiesel & Jeep Grand Cherokee EcoDiesel is designed to increase power and performance in your truck.

The EAS Competition Kit gives users the ability to monitor EGTs and add an additional 0-100 PSIg boost and -40F to 300F temp sensors for ultimate control. This kit is designed for those truck owners who have upgraded turbo or turbo's and other mods ,where the stock sensors just aren't enough anymore. This kit is ideal for trucks participating in dyno competitions, sled pulls, and drag racing.

The BD-Power 1057732 Throttle Sensitivity Booster increases throttle sensitivity, and reduces that laggy pedal feeling in your Dodge Ram 5.9L&6.7L Cummins, 3.0L EcoDiesel, & Ford Super Duty 6.7L Powerstroke.

DANA #70 OVERALL HEIGHT 4 1/8IN 6 QUART CAPACITY DIFFERENTIAL COVER

The Mag-Hytec D 12-9.25 Differential Cover for your 2014-2017 Ram 1500 3.0L EcoDiesel provides increased lubricant and cooling capacity for hard working recreational and service vehicles.

The CTS line of products have a built-in video port that allows users to connect Edge’s new state-of-the-art back-up camera. The CTS’s high-resolution, 4.3 inch color screen allows users to see what’s going on behind them with the Edge camera connected. The camera mode on the CTS automatically engages when the vehicle goes into reverse*. The back-up camera option is a must have for towers and safety-conscious drivers.

The aFe Universal fit 409 Stainless Steel Performance Muffler is designed to provide a deep, throaty, powerful sound on acceleration but maintain a smooth sound at idle

The AFE Universal fit 409 Stainless Steel Performance Muffler is designed to provide a deep, throaty, powerful sound on acceleration but maintain a smooth sound at idle.

EXHAUST TIP 304 STAINLESS 5IN IN 8IN OUT 18IN LENGTH

UNIVERSAL TIP, 8IN O.D., ROLLED END, 4IN INLET 18IN IN LENGTH, T304

Fox Racing Shox 2.0 Performance Series IFP steering stabilizers help take the load off your steering components, and keep your tires tracking straight and true.

Fox Racing Shox 2.0 Performance Series IFP steering stabilizers help take the load off your steering components, and keep your tires tracking straight and true. Oversized off-road tires have a tendency to seek out traction in any direction, while their large knobs and open tread pattern can cause your front end to wander on or off the road.

EXHAUST TIP 304 STAINLESS 5IN IN 8IN OUT 18IN LENGTH

UNIVERSAL TIP, 8IN O.D., ROLLED END, 4IN INLET 18IN IN LENGTH, T304

UNIVERSAL TIP, 7" O.D., ROLLED END, 4" INLET 18" IN LENGTH, T304

UNIVERSAL TIP, 7" O.D., ROLLED END, 4" INLET 18" IN LENGTH, T304

EAS STARTER KIT W/ 15IN EGT CABLE CS/CTS/CS2/CTS2

Bring the maximum power out of your exhaust with the aFe Power Muffler-Delete Pipe. This pipe is constructed out of 409 stainless steel and is used to eliminate the 5" In/Out muffler used in most factory or performance 5" exhaust systems.

Use multiple OBDII devides with the Auto Meter 5323 OBDII Splitter. This low profile OBDII Signal Splitter / Pass Through allows for remote location of connections for OBDII products like the Auto Meter AirDrive, DashLink and Dash Control while providing an easy to access connection point for other onboard devices requiring access to the OBDII data stream.

MUFFLER - XLERATOR STAINLESS STEEL, ROUND, 30IN OAL, 4IN

Bring the maximum power out of your exhaust with the aFe Power Muffler-Delete Pipe. This pipe is constructed out of aluminized steel and is used to eliminate the 5" In/Out muffler used in most factory or performance 5" exhaust systems.

Bring the maximum power out of your exhaust with the aFe Power Muffler-Delete Pipe. This pipe is constructed out of 409 stainless steel and is used to eliminate the 4" In/Out muffler used in most factory or performance 4" exhaust systems.

Bring the maximum power out of your exhaust with the aFe Power Muffler-Delete Pipe. This pipe is constructed out of aluminized steel and is used to eliminate the 4" In/Out muffler used in most factory or performance 4" exhaust systems.

The EAS Temperature Sensor is a -40°F to 300°F 1/8” NPT supplied with the connectors to plug directly into Edge’s Universal Sensor Input System. Using Edge’s Temperature Sensor you can monitor Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Use this in conjunction with the Universal Sensor Input and the CS or CTS monitor to allow you to view critical temperatures with the most state-of-the-art product on the market today.

Use multiple OBDII devides with the Auto Meter 5323 OBDII Splitter. This low profile OBDII Signal Splitter / Pass Through allows for remote location of connections for OBDII products like the Auto Meter AirDrive, DashLink and Dash Control while providing an easy to access connection point for other onboard devices requiring access to the OBDII data stream.

The Edge Products 98920 EAS Replacement EGT Lead is a replacement for the original lead that comes with the Edge Products 98620. 15" Lead Replacement for 98620