aFe BladeRunner 6.4L Intercooler
Bladerunner Intercoolers represent the next generation of intercoolers. The Bladerunner intercoolers utilize a 3.15" bar and plate design that is 15% larger than the competitors and outflows OE style tube and fin core designs by 74%! This design...
MISHIMOTO MMINT-F2D-08K INTERCOOLER PIPE & BOOT KIT
Mishimoto performance intercooler kit for the 2008-2010 Ford 6.4L Powerstroke. This kit includes everything you need to improve airflow, substantially decrease air-charge temperatures, reduce EGTs, and support your truck at any power level.
MISHIMOTO MMINT-F2D-08 INTERCOOLER
Mishimoto performance intercooler for the 2008-2010 Ford 6.4L Powerstroke. Your 6.4L needs an intercooler that can effectively reduce intake temperatures and withstand high boost pressures.
SDP 6.4 08-10 Ford EGR delete w/ SDP elbow, adapter & I/C
This kit fits 2008-2010 Ford 6.4 engines to remove the EGR coolers and clean up the left side and front of the engine. This will also allow the removal of the throttle housing and EGR valve to install the SDP intake and adaptor.
RCD Stainless Steel Intake Elbow
River City Diesel's Stainless Steel Intake Elbow for the 6.4 Ford. Stainless steel construction. The only drop in elbow that has been truly radiused for perfect airflow distribution to both banks The competitors elbows are angled such that it...
DIESELSITE COMPLETE BOOT SET
The kit includes: The two boots that connect the intercooler pipes to the intake manifold and the two boots that connect the intercooler pipes to the intercooler. It includes four T-bolt spring clamps for the upper boots and 4 T-bolt spring...
Sinister Intake Elbow SMC INTEL 6.4
Sinister Diesel Intake Elbow for the 2008-2010 6.4L.
This kit is designed and engineered to out perform the competition.
Comes with a Mandrel bent aluminum tube and CNC base plate designed to hold even the highest boost levels.
Mandrel bent tubing
Fully TIG welded and pressure tested
*EGR Delete Required
DIESELSITE 6.4L HOTSIDE LOWER INTERCOOLER BOOT KIT
The kit includes the boot that connects the intercooler pipe to the intercooler. It includes two T-bolt spring clamps. The spring bolt clamps are 300 series stainless steel with zinc coated bolts with a 300lb clamping strength. Recommended torque is 60 in/lbs.