EDGE PRODUCTS 98617 EAS COMPETITION KIT
The EAS Competition Kit gives users the ability to monitor EGTs and add an additional 0-100 PSIg boost and -40F to 300F temp sensors for ultimate control. This kit is designed for those truck owners who have upgraded turbo or turbo's and other mods ,where the stock sensors just aren't enough anymore. This kit is ideal for trucks participating in dyno competitions, sled pulls, and drag racing.
BULLY DOG 40420 TRIPLE DOG GT PLATINUM DIESEL DOWNLOADER
The Bully Dog GT 40420 is a performance tuner AND monitor all in one compact electronic device! Get more horsepower, torque, and increase fuel efficiency in your truck with Bully Dog’s legendary tuning. All you need to do is plug the GT Tuner into your OBDII Port and perform a simple download to the vehicles ECU.
Edge Products Insight CTS3 EP84130-3
Observe and understand your vehicle parameters using Edge state-of-the-art technology. Our Insight CTS3 delivers unmatched monitoring capability for any OBD II vehicle (1996 or newer). This digital gauge display works well with custom tuning products or as a stand-alone monitor for total insight on how your vehicle is performing.
SUPERCHIPS 2845 FLASHPAQ F5 TUNER
The Superchips 2845 Flashpaq F5 Tuner is the all-in-one solution to adding power and performance to your 2001-2016 GM 6.6L Duramax. The Flashpaq F5 is a handheld performance programmer with an easy-to-use, high-resolution color screen that comes complete with scanning features and of course performance tuning for your truck.
GDP MONITOR *EZ LYNK COMPATIBLE
Monitor your GDP EZ Lynk Tuned truck with the GDP Tuning EZGDPM EZ Lynk Monitor. This HD Monitor has been specially designed to withstand the extreme temperatures in the cab of your truck.
SUPERCHIPS 5845 FLASHPAQ F5 PRO
The Superchips 5845 Flashpaq F5 Pro provides you with the vessel to load custom tuning into your 2003-2016 Ford 6.0L, 6.4L, 6.7L Powerstroke. Designed to work with HP Tuners Software, the Flashpaq F5 Pro gives you the ability to work with the tuner of your choice to maximize the performance of your high performance diesel.
EDGE PRODUCTS 98202 BACK-UP CAMERA
The CTS line of products have a built-in video port that allows users to connect Edge’s new state-of-the-art back-up camera. The CTS’s high-resolution, 4.3 inch color screen allows users to see what’s going on behind them with the Edge camera connected. The camera mode on the CTS automatically engages when the vehicle goes into reverse*. The back-up camera option is a must have for towers and safety-conscious drivers.
GDP EZLYNK 6 inch Android Monitor
The EZ LYNK Auto Agent combines function and convenience, revolutionizing the way you monitor, diagnose, and update your vehicle's performance.
BULLY DOG SENSOR STATION W/ PYROMETER PROBE 40384
The Bully Dog Sensor Station is an add-on that allows you to read EGT's on your GT Tuner, PMT & Watchdog. Additional sensors such as thermocouples, speed sensors, boost sensors & liquid temperature sensors can also be added to monitor even more on your Bullydog Tuner!
EDGE PRODUCTS 98653 EAS SHIFT-ON-THE-FLY ACCESSORY 2011-2016 GM 6.6L DURAMAX (REQUIRES INSIGHT CS2/CTS2)
The Edge Products 98653 EAS Shift-On-The-Fly Accessory gives you the ability to change custom tunes on your Insight CS2 or CTS2 monitor
while driving your 2011-2016 GM 6.6L Duramax. Producing the same voltage signals between 1v, 2v, 3v, 4v, and 5v that a conventional switch
would, your Insight monitor now has even more utility while eliminating the need to drill a hole in your dashboard.
Here is how it works:
1. The EAS Shift-on-the-fly accessory, connected to your Insight CTS2, will control your tune levels for vehicles requiring a switch to control the
power levels.
2. Switching occurs by changing voltages between 1v, 2v, 3v, 4v, 5v. Most custom-tuned vehicles run within these parameters.
3. Wire or plug the switch in just as you would your normal Shift-On-The-Fly (SOTF) or Driver-Selectable-Tuning (DST) switch. Then, flash the
tune into your vehicle that enables the SOTF/DST functions.
4. Enjoy changing your power levels right through the Insight CS2 or CTS2 screen!
FEATURES:
No Additional Switches Necessary
Change Your Existing Custom Tunes On-The-Fly From Your Insight CS2 or CTS2
Compatible with EZLYNK & EFIlive SOTF/DST Tuning That Utilizes Voltage Signals To Switch Tunes*
Note:
*To ensure compatibility with your SOTF/DST tunes, please contact us or check with your tune manufacturer.
The Edge Products 98653 takes the place of having to add a separate Shift-On-The-Fly switch to your existing custom tunes. It does not convert
your Insight into a custom tune downloader.
BULLY DOG 33308 CUSTOM A-PILLAR MOUNT
The Bully Dog Custom Gauge Pods have been designed to work with our PMT, GT Gas, GT Diesel, and the Bully Dog WatchDogs. Also fits H&S Black Maxx & Mini Maxx. These custom pods offer a clean OEM-like fit for your Bully Dog performance product.
BULLY DOG 33307 CUSTOM A-PILLAR MOUNT W/ SPEAKER
The Bully Dog Custom Gauge Pods have been designed to work with our PMT, GT Gas, GT Diesel, and the Bully Dog WatchDogs. Also fits H&S Black Maxx & Mini Maxx. These custom pods offer a clean OEM-like fit for your Bully Dog performance product.
BULLY DOG 33306 CUSTOM A-PILLAR MOUNT W/O SPEAKER
The Bully Dog Custom Gauge Pods have been designed to work with our PMT, GT Gas, GT Diesel, and the Bully Dog WatchDogs. Also fits H&S Black Maxx & Mini Maxx. These custom pods offer a clean OEM-like fit for your Bully Dog performance product.
