Home > Ford > Ford Powerstroke 2003-2007 6.0L > Intercoolers
Sort By:
Page of 1
aFe BladeRunner intercooler MISHIMOTO MMINT-F2D-03K INTERCOOLER PIPE & BOOT KIT MISHIMOTO MMINT-F2D-03 INTERCOOLER
aFe BladeRunner intercooler
Our Price: $1,695.00
The BladeRunner Intercooler represents the next generation of intercoolers. The BladeRunner intercoolers utilize a 3.15" bar and plate design that is 44% larger than stock and outflows OE style tube and fin core designs by 40%! Features: End... Mishimoto has released a performance intercooler kit for the 2003-2007 Ford 6.0L Powerstroke. This kit includes everything you need to improve airflow, substantially lower air charge temperatures, reduce EGTs, and support your truck at any power level. Mishimoto has developed a performance intercooler for the 2003-2007 Ford Super Duty with 6.0-Liter Powerstroke Engine. This intercooler will give the perfect cooling capacity needed for a turbo diesel truck.
DIESELSITE 2003-2007 6.0L INTERCOOLER BOOT KIT (WITH STEEL TUBING ONLY) ALSO USED ON 99-03 7.3 TO SWAP 6.0 INTERCOOLER DIESELSITE 2005-2007 6.0L TURBO OUTLET ANGLED MOLDED REPLACEMENT BOOT DIESELSITE 2003-2004 6.0L TURBO OUTLET ANGLED MOLDED REPLACEMENT BOOT
The kit includes the two boots that connect the inter-cooler pipes to the inter-cooler. It includes four T-bolt spring clamps. The spring bolt clamps are 300 series stainless steel with zinc coated bolts with a 300lb clamping strength. Recommended torque is 60 in/lbs. For use on the 2005-2007 Ford 6.0L PowerStroke Super Duty. Choose the appropriate option for your truck in the menu above. See the note below for more clarification.
For use on the 2003-2004 Ford 6.0L PowerStroke Super Duty. Choose the appropriate option for your truck in the menu above. See the note below for more clarification.
DIESELSITE 6.4L HOTSIDE LOWER INTERCOOLER BOOT KIT INTAKE BOOT - 3"ID X 4.25" LONG
The kit includes the boot that connects the intercooler pipe to the intercooler. It includes two T-bolt spring clamps. The spring bolt clamps are 300 series stainless steel with zinc coated bolts with a 300lb clamping strength. Recommended torque is 60 in/lbs. Fits stock applications. Each of these boots take one 3" retaining ring and there is no need for additional clamps.
Recommended Torque is 60 IN/LBS