Fast guide to Smarty-J67 Features
CaTCHER software's
inside- Three different
performance levels: 40 / 70 / 100 hp - Improved fuel economy
- Optimized drivability
- Fastest download in the
industry, up to three times faster than the
competition, a typical ECM update takes about 5 minutes - ABS tire height updates
in just few seconds from 22,5" to 44" - Manual High-Idle is
enabled in all software’s - Reads Diagnostic Trouble
Codes in plain text - No tools required, no
fuses to pull - USB built in for simple
updates from internet - Easy installation
- Reliable, it works off
your OEM hardware - Programmable parameters
for fine tuning - Power on Demand
function**
* Unlike the Smarty JR for the 5.9L, the Smarty
J67 is not untraceable
** PoD function not yet available for MY 2010 and above trucks
Fast guide to Smarty-J67 software levels
The horsepower settings have a modified
"Torque management" (
TQM ). The throttle response is greatly improved but is set to a safe
limit. With "Safe" I mean safe for your tranny and rest of the driveline.
- SW # 1 : 40 hp increase
- SW # 2 : 70 hp increase
- SW # 3 : 100 hp increase
Tested
on stock trucks on a Dyno.
Stock means just that. Stock! Even the air filters were stock...
We checked the "baseline" (the stock truck hp at the rear wheels)
twice in a day in order to be sure about our findings. The above
declared hp numbers are all rounded down to the closest number.
ABS / Speedo recalibration
The tire height can be adjusted up to 44" in increments of 10 tenth of
an inch in just a couple seconds. Of course, Smarty needs to be VIN#
locked to the truck in order to get into the ABS adjustment section.
DTC Code reader
The name says it all.
You can read and erase codes. Codes are displayed also in plain
English. That's old news by now. Smarty S-03 was the first one to
provide that utility; others found the idea to be a good one too.
(Smarty does erase ABS codes too but does not display them)
ECM update speed
Faster than anything else on the market! Again we've done our
homework on the protocol. About 5 minutes. Three times faster than a
Star-Scan diagnostic tool or competitor.
We have developed our own bootloader in order to not have to pull
fuses should an update become interrupted for any reason. All you
have to do is to turn the key off / key on Smarty does everything else
on its own.
Updates
The CaTCHER softwares as they are today are only a starting point.
Expect major news in future. We’re for your feedback, opinions, likes,
dislikes...
We will make Smarty do what YOU want, TOGETHER
