Home > Dodge > Dodge 5.9L Cummins 2003-2004 >

H&S MOTORSPORTS 452001 SX-E TURBO KIT
H&S MOTORSPORTS 452001 SX-E TURBO KIT


 
Alternative Views:
Our Price: $2,749.00


Product Code: 452001


Compressor Wheel Size*: 		Billet 63mm Inducer
Billet 64mm Inducer
Billet 66mm Inducer
Billet 69mm Inducer

Qty:  
Description
 
The H&S Motorsports 452001 SX-E Turbo Kit replaces the factory turbocharger in your 2003-2007 Dodge 5.9L Cummins with a BorgWarner SX-E Single Turbo to provide increased performance and reliability.

The stock turbocharger that comes equipped on the 5.9L Cummins from the factory can quickly become a liability when it is pushed beyond what the OEM designed it for. Excessive drive pressure and exhaust gas temperature are common issues associated with the factory turbocharger. This kit is designed to replace the factory turbocharger with a new BorgWarner SX-E unit to provide not only a significant performance increase, but also to gain reliability over the factory unit.

H&S Motorsports has performed extensive testing of BorgWarner's SX-E line of turbochargers and they have proven to be a great match for the 6.7L Cummins engine. All SXE turbo options include the .91 A/R divided (twin scroll) turbine housing and the true divided exhaust manifold takes full advantage of the twin-scroll design. The 73mm turbine wheel is larger than H&S Motorsports is used to using, but the twin scroll design helps to retain the response and drive-ability in the lower RPM range. The benefits of the 73mm turbine wheel include lower drive pressure, lower EGTs, and more power! During testing HSM experienced an average of a 200 degree drop in peak exhaust gas temperatures when compared to the factory turbocharger. Durability and reliability also play a big part in parts selection and BorgWarner has stepped up their game with the 360-degree thrust bearing assembly that is
featured in all SX-E turbochargers.

You may be aware that BorgWarner's SX-E compressor housings are not currently offered with a 90-degree outlet option. No problem! As a solution, H&S Motorsports CNC machined each SX-E compressor housing in-house to take advantage of the v-band outlet and supply a cast aluminum 90-degree elbow with v-band clamp. We felt that an aluminum elbow was necessary for this application since air temperatures are going to be the hottest right at the compressor discharge and a silicone boot would not be as reliable.

Without any fueling or tuning changes, you can expect to pick up at least 60-100 WHP
(depending on which SX-E option is used). With complimenting fuel modifications, these
turbochargers have been known to put down some serious power!

Turbocharger Options:
63mm Forged-Milled Compressor Wheel (575-625 WHP) Part# 452001-63
64mm Forged-Milled Compressor Wheel (600-650 WHP) Part# 452001-64
66mm Forged-Milled Compressor Wheel (650-700 WHP) Part# 452001-66
69mm Forged-Milled Compressor Wheel (700-750 WHP) Part# 452001-69
(All of the above options include the 73mm turbine wheel and .91 A/R divided turbine
housing.)

Whether you're looking for a performance gain or just wanting something to replace the stock
junk, this kit is a great solution for you. It will make your 5.9L Cummins run like it is supposed
to!

Kit Contents: HSM SX-E Turbocharger, SX-E 90-Degree Compressor Outlet Elbow & Clamp,
HSM Cast Exhaust Manifold, HSM Downpipe, HSM Charge Pipe, HSM Polished Intake, AFE
Air Filter, Hardware, Hoses, Clamps, Plugs, Gaskets & Adapters

Note: Aftermarket tuning may be required.

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Dodge > Dodge 5.9L Cummins 2003-2004
Dodge > Dodge 5.9L Cummins 2004.5-2007
Dodge > Dodge 5.9L Cummins 2003-2004 > Turbo Upgrades + Wastegate
Dodge > Dodge 5.9L Cummins 2004.5-2007 > Turbo Upgrades + Wastegate
Dodge
Dodge > Dodge 5.9L Cummins 2003-2004 > Turbo Upgrades + Wastegate > Single Turbokits
Dodge > Dodge 5.9L Cummins 2004.5-2007 > Turbo Upgrades + Wastegate > Single Turbokits